Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Quality Assurance Specialist, Position Description Number D1818000 and is part of the 158th Maintenance Group Quality Assurance of the Vermont Air National Guard. *This position is also advertised to Active Guard Reserve Airmen under announcement number MVA-AF-24-44 Responsibilities Serves as the Office of Primary Responsibility (OPR) for wing maintenance policy, advising supervisors and employees on both general policy and specific maintenance matters. Makes decisions and recommendations on technical concerns presented by supervisors. Utilizes a comprehensive knowledge and ability to interpret Air Force Instructions, Technical Orders, engineering drawings, product specifications, Air Force Occupational and Health (AFOSH) and environmental standards, public law, and locally developed policy. Evaluates and assesses complex systems, subsystems, integrated systems/subsystems, or components for conformance to applicable technical data, engineering drawings, standards and specifications. Evaluates, conducts reviews, activity inspections and management compliance of all maintenance activities to include the logistics maintenance support functional areas such as production, programs and mobility, maintenance training, plans, scheduling and documentation and data base management as directed by the Maintenance Group Commander. Identifies production problems, excessive overtime, discipline, housekeeping and technical discrepancies and attempts to identify the underlying cause for the deficiencies. Establishes and develops performance checklists and metrics in coordination with the Quality Assurance Supervisor. Develops local operating instructions to supplement regulations and manuals of higher echelons in the area of aircraft and aircraft systems quality assurance. Reviews all Operating Instructions (Ois) to ensure locally published instructions are technically accurate, complete and consistent with Air Force (AF) and Major Command (MAJCOM) policy. Coordinates with affected commanders on base and ensures the instruction is published as a wing operating instruction. Serves as a key team member in collating and reporting compliance metrics to Major Command(s). Maintenance Standardization Evaluation Program (MSEP): Administers, evaluates, and coordinates a comprehensive quality assurance, maintenance standardization, and inspection program for all areas of the maintenance organization, all maintenance disciplines, job series and Air Force Specialty Codes (AFSCs). Evaluates the quality of maintenance accomplished in the maintenance organization and performs the necessary quality functions to execute the MSEP, designed to provide management an objective sampling of both the quality of equipment and the proficiency of maintenance personnel. Ensures the maintenance organization meets its responsibility for air-worthy aircraft and component quality for a broad and complex production workload, e.g., highly advanced aircraft, aircraft systems, avionics systems, electronic equipment, aircraft structures, composites, life safety systems, armament, munitions, and other areas of similar complexity. Participates in a review of the organization's quality plans, procedures and practices to assure adequacy and compliance to local and higher-level directives. (a) Executes the evaluation program and accumulates data using Inspection and Evaluation techniques such as Task Evaluations, Quality Verification Inspections, Special Inspections, Personnel Evaluations and Management Inspections. Evaluates the quality of in-process and after-the-fact maintenance and ensures prescribed technical and management procedures are followed. Serves as the subject matter expert for critical assessment programs such as; Unit Self Inspections, Maintenance Standardization, Operational Readiness and Unit Compliance Inspections. Responsible for the development and maintenance of organizational level checklists. Ensures metrics are established and monitored to assess key result areas for successful mission accomplishment including, but not limited to, items where non-compliance would affect system reliability or result in serious injury, loss of life, excessive cost, or litigation. Evaluates the proficiency of assigned personnel in the execution of assigned maintenance tasking through Personnel Evaluations (PEs). Determines the proficiency and qualifications of certified personnel. Assess the relationship between personnel evaluation and technical inspection results to identify strengths or opportunities for improvement in the evaluation program. Monitors and assesses the organization's quality program and elements of the program to gauge compliance with directives and established processes. Identifies deficiencies, implements corrective measures, and improves processes to enhance mission effectiveness and efficiency. Ensures safety, security, and Consolidated Tool Kit {CTK) programs are followed in accordance with applicable regulations and public law through the routine inspection of work centers. **REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES** Requirements Conditions of Employment Qualifications OPEN AREAS OF CONSIDERATION: AREA 1, 2 Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 (Competitive and Excepted) Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite) - Only those Vermont National Guard members who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed. Area II: All Members of the Vermont Air National Guard. Military Grades: TSgt/E6-MSgt/E7 GENERAL EXPERIENCE: Experience developing and implementing a quality assurance program designed to ensure compliance, reliability, acceptability of products, improve quality in a cost-effective manner and safety for variety of assigned products and systems. The work involves application of a complete range of quality assurance principles, techniques and methodology to plan and accomplish projects for products having complex characteristics such as aircraft, aerospace ground equipment, electronic equipment and systems, munitions, armament and other associated equipment. The incumbent implements and monitors the computerized methods and statistical quality assurance techniques (random sampling, averages, means, standard deviations, trend analysis, etc.) for analyses for the repair, process, and modification quality. The specialist's assignments are concerned with the entire range of quality assurance principles, techniques and procedures. SPECIALIZED EXPERIENCE:1-year specialized experience equivalent to at least the next lower grade. In addition to the OPM IORs, specialized experience includes experience, education, or training involving a thorough knowledge of product or range of products involved, the manufacturing methods and techniques, special processes, test, and performance requirements; and skill in developing plans and programs. Experience possessed by an expert in specialization able to give technical direction to otherwise competent workers. Experience determining operations when difficult and questionable phases of malfunctions are found. Experience which required significant and concrete work accomplishments (i.e., special projects, working groups, or detailing assignments) involving interpersonal contacts in a quality assurance or related field. Experience in dealing with management principles and supervisory responsibility for the function required by type of position to be filled and the organization involved. Quality of Experience: Length of time is not of itself qualifying. Candidates' experience should be evaluated based on the duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience, training, and education must show possession of the knowledge, skills, and abilities needed to fully perform the duties of the position to be filled. --knowledge of assigned aircraft and complex aircraft systems to include but not limited to electronic equipment and systems, manual and automatic flight controls, airframe, landing gear, pneudraulics, jet engine propulsion and associated systems, Aerospace Ground Equipment, Support equipment, and related test equipment. --Knowledge of munitions storage methods, procedures, and techniques to determine storage location based on condition code, compatibility, and security requirements. --Knowledge of the techniques, documentation, and equipment used in the examination, classification, and maintenance of munitions assets and their components. --Comprehensive and thorough knowledge of the entire maintenance quality assurance program to include the full range of principles, concepts and methodology and the establishment of procedures for monitoring the quality of products in a maintenance environment. --Broad knowledge of the practices, policies and procedures of related functional and administrative activities such as Technical Order Distribution Office (TODO), logistics maintenance support functions, contract administration and coordination of CLS or CFT, engineering disposition requests, maintenance production, procurement, supply support, munitions storage etc. and skill in effecting appropriate interface/coordination of quality assurance plans and programs and evaluations with these activities. Broad knowledge of the TCTO and QDR process and the interface/coordination with depot engineering and supply process. --Thorough knowledge of the Maintenance Standardization Evaluation Program (MSEP). --Broad knowledge of end items, systems, including quality characteristics and working knowledge of manufacturing methods, special processes and the interrelationship of various parts. Working knowledge of systems, subsystems and end item components and the functional relationships among components and subsystems, and test and measurement techniques. --Broad knowledge of Higher Headquarters regulations and instructions, PDM work specifications, local directives including Quality Plans, Technical Orders, Military Specifications, and International Commercial Practices such as ISO 9000. --Comprehensive knowledge of inspection and evaluation techniques, statistical methods, mathematics, production management, industrial management, and database management skills to perform root cause, deficiency, and trend analysis. Analyses are used to validate and update Acceptable Quality Levels (AQLs), frequency changes to Routine Inspection Lists (RILs), and recommendations for corrective maintenance practice action. --Broad knowledge of the body of laws, regulations, policies and procedures relating to aircraft maintenance, ground, explosive & flight safety, occupational health and environmental compliance. Ability to use this knowledge to develop an evaluation plan and prevention effort to minimize risk and prevent damage to equipment, structures, weapons systems, or injury to personnel. --Skill in applying this knowledge to the identification of quality problems and resolving the difficult and complex work assignments. Skill to plan and conduct studies, analyze performance and quality data and to develop sound recommendations for correction of quality system deficiencies. --Ability to conduct technical reviews, analyze findings and develop recommendations for corrections or improvements in the quality assurance program. Ability to prepare technical reports on quality levels, to identify specific problem areas and to recommend corrective action. --Ability to communicate effectively through written and oral presentations. Skill and ability to work effectively in stressful situations and maintain effective interpersonal relationships at all levels within the organization. Ability to plan and successfully complete individual projects and/or larger projects. --Skill in using various computer and software applications to include but not limited to: word processing programs, spreadsheets, email services, databases and database management. Please be advised: 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed. 3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience. 4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts. Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement. Education There are no specific educational Requirements for this position. Additional Information The primary purpose of this position is to establish and execute a planned systematic approach of quality assurance for all areas of aircraft maintenance, designed to provide the maintenance managers confidence that aircraft, aircraft systems, munitions, equipment, products or supporting processes conform to technical, safety, workload and customer requirements. The overall objective is to ensure that quality considerations are addressed, and requirements achieved for all aircraft maintenance work and support functions to ensure end items perform as intended with reliability. Serves as the primary technical advisory process in the maintenance organization designed to assist maintenance managers. Serves as the Quality Assurance Specialist (QAS) for the planning, implementation and execution of a quality assurance program that includes the full range of quality principles, concepts, inspection techniques, surveillance and evaluations related to quality assurance functional programs of all assigned aircraft, aircraft components, aerospace ground equipment, electronic equipment & systems, armament, munitions, engines, associated systems and maintenance personnel from numerous job series, and maintenance disciplines. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. OTHER CONDITIONS OF EMPLOYMENT & NOTES: -This position is subject to the Lautenberg amendment to the gun control act of 1968 which makes it a felony for anyone who has been convicted of a misdemeanor crime of domestic violence to ship, transport, possess, or receive firearms or ammunition. Civilian personnel of the Department of the Defense are not exempt from this provision. If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). Vermont Air National Guard personnel who are bonus recipients/student loan repayment program recipients may have their benefits terminated and/or recouped if selected as a Permanent/Indefinite Military Technician. Applicants should contact the VTANG Incentive Manager at 802-660-5211 to determine any possible termination and/or recoupment actions that may result from accepting this position.