The UPMC Center for Emergency Medicine is looking to hire a Full-Time Mechanic to support STAT MedEvac.

Schedule:

Nights (4) 10-hour shifts 9 pm to 7:30 am Sunday night – Wednesday night

Purpose:

The Fixed Base mechanic is directly responsible to the Fixed Base Manager. He/she is responsible for the maintenance on the Center for Emergency Medicine of Western PA, Inc. aircraft.

Responsibilities:

Provides the Fixed Base Manager with the current airworthiness status of CEM aircraft at the Fixed Base. Ensures compliance with all FAA, manufacturer, and company maintenance requirements for all Center for Emergency Medicine of Western PA, Inc. aircraft. Assures that no defective or un-airworthy part or components are installed on any aircraft. May authorize or return to service any aircraft operated by the Center for Emergency Medicine of Western PA, Inc. after any maintenance function. Is responsible for the timely submission of inspection and maintenance associated paperwork at the fixed base location to the records department. May be required to perform duties and responsibilities for another base site mechanic to cover vacations or off duty time. Will maintain adequate levels of parts stock at base to ensure no shortages. Ensure all parts, components, sub-components, and consumables are received, inspected, and properly tagged. Ensure that a daily check is performed on the aircraft assigned to the fixed base once in every 24-hour period after the first flight following the last daily check. Will perform a daily cleaning of the aircraft as required. Ensures that all referenced maintenance publications are at current revision status prior to use. Updates and maintains currency of the aircraft computer run status report for the aircraft assigned to the Fixed Base. Maintain ground support equipment assigned to the base and may be responsible for monitoring and maintaining local fuel storage / dispensing system depending on location. Monitors shelf-life limitations of all parts and supplies as applicable. Ensures that calibrated tools/equipment are at a current calibration status prior to use.