Valid TWIC card required. 

Duties and Responsibilities

 

Reports to Gang Foreman to obtain schedule and work instructions. Longshore in hold may be required to communicate via handheld radio. May be required to handle tools and/or lashing materials. May be required to place or remove dunnage including but not limited to under blades, buckets, or other attachments that would rest on transport surface. Must remain clear of all suspended loads while loading and discharge operations. May use a push broom to sweep discarded materials to the designated area. May use locking poles to disengage locks at corners of containers. May place deck shoes (4-4.8 lbs.) on the floor of a bay in the vessel to sit containers on. May be required to hook and unhook lifting gear. Know the fundamentals of rigging and slinging. Utilizes rigging/slinging to load and unload containers, steel commodities, project cargo and bulk material. Able to operate forklifts. Be able to dismantle and store rigging/slinging equipment after use. Signal or verbally direct workers engaged in hoisting and moving loads, in order to ensure safety of workers and cargo. Know the Crane hand signals. Must be able to follow all safety guidelines.

Vessel Access

 

Climbs up or down the gangway to access the vessel. (46 – 60 steps; varies for each vessel depending on the height of vessel and water level). Handrails are located on each side of the gangway at waist height. Climbs up or down vertical ladders aboard the vessel. Transportation Worker Identification Credential (TWIC) Required.

Required Safety Gear must be worn at all times to include

 

Safety vest, safety glasses, steeled-toe shoes, and hard hats must be worn on the terminal or in the yard.