Job Seekers, Please send resumes to resumes@hireitpeople.com

Detailed Job Description:

Hands- on experience on N9K, NCS switches. Hands- on experience in configuring vPC, Intel 10G,25G, 40G interfaces. Very Good Troubleshooting expertise on LACP, LLDP. Bringing up the Setup (.i.e. Rack Stack ). Hands- on experience in changing the faulty drives (HDD, SSD). Hands- on experience in installing SRIOV cards on UCS-C, Quanta, HP, DELL servers. Hands- on experience in boot flashing the intel drivers. Hands- on experience in procurement when there is a need on the HW parts. Hands- on experience in doing RMA. Very strong expertise in configuring the routing, switching between the Testbeds own by the team. Hands- on working experience in HWs like (UCS-b,C , Quanta). Hands- on experience in ACI, Leaf/spine Topology. Hands- on experience in configuring BGP, OSPF based on the requirements. Hands- on experience in upgrading Nexus os, NCS switches, etc. Ability to setup the end-end network topology for NFVI product architecture. Ability to troubleshoot and solve networking problems. Install new / rebuild existing servers and configure hardware, storage, etc. in accordance with standards and project requirements. Hands- on experience with installation/configuration/troubleshooting of the appliances. Cisco UCS® C240 M4/M5 , Cisco UCS C220/240 M4/M5, HP DL360 Gen9, Cisco UCS 220/240 M4/M5 (SFF), Quanta servers, Cisco UCS B200 M4 blades, Nexus 9k, NCS- 5500, ASR9K. Strong knowledge of configuration of routing protocols such as BGP, OSPF, ISIS, IPv4/IPv6, MPLS, Multicast, security, QoS and VLANs are required. Apply OS patches and upgrades on a regular basis. 

Experience required: 10 Years