Eaton’s IS AER FMC division is currently seeking a CMM Inspector.

The hours for this role are 7:00 am - 3:30 pm

The hourly rate for this position is $21.85 per hour.

Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. 

KEY ACCOUNTABILITIES:
•    Select appropriate measuring instruments and measurement techniques for the job at hand.
•    Set-up and inspect component parts to the appropriate drawings, process sheets, and inspection instructions.
•    Document inspection results in accordance with the appropriate Quality Assurance Procedure.
•    Perform and document results of first article inspections, FAA conformity inspections and expanded inspections on required programs.
•    Utilize and operate all measuring equipment and instruments located within the machine shop and inspection locations.
•    Prepare programs to direct the Coordinate Measurement Machines to measure parts to a given drawing.
•    Document and interpret Coordinate Measurement Machine inspection results.
•    Support Engineering Development efforts by performing both routine and specialized inspection as required by the circumstances.
•    Ability to read and complete inspection ledger, inspection check sheet, operation sheet, move ticket and discrepancy report (DR/DMR), discrepant material report (DMR), and other paperwork as necessary to comply with Quality Systems including MRP system transactions.
•    Notify supervisors when work received does not meet the specifications required by previous operators including paperwork requirements as observable.
•    Performs operator defined TPM and/or 5S tasks as required.
•    Return all tools to their proper location at the end of the shift and cleaning work area.
•    Proper use of all tools and gages necessary to complete and to verify that all work performed completed to specifications as required.
•    Compliance to Manufacturing Self-Release Process (MSRP) and responsible for the quality of the product going to next operation.
•    Perform other duties as required with the job classification.

PREFERRED QUALIFICATIONS:
•    Bachelor’s degree in aerospace or mechanical Engineering from an accredited institution
•    Prior work experience programming coordinate measurement machines (CMM).
•    Prior work experience using various inspection techniques using handheld tools and equipment such as calipers, micrometers, indicators, micro-Hite, comparators, etc.
•    Prior work experience using basic table layout techniques to inspect including, but not limited to, true position, perpendicularity, runout, and parallelism.
•    Working knowledge of AS9100 & AS9102 requirements. 

BASIC QUALIFICATIONS:
•    High school diploma or GED required.
 

One of the following:
•    Five (5) years prior work experience in a manufacturing or military environment reviewing engineering drawings to perform machining and inspection requirements utilizing various inspection techniques and equipment to meet GD&T standards.
•    Five (5) years prior work experience in a manufacturing or military environment reviewing engineering drawings to perform inspection requirements such as, true position, perpendicularity, and other GD&T requirements utilizing table layout techniques. 
•    An Associates Degree in a technical field such as drafting, designing, industrial production, manufacturing engineering technology or machining plus a minimum of three (3) years of work experience interpreting engineering drawings to perform machining and or inspection requirement utilizing table layout techniques such as, true position, perpendicularity, and other GD&T requirements in a manufacturing or military environment.
•    This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee
•    No relocation benefits offered for this position. Only candidates residing within one hundred miles of Eaton’s Jackson, MS facility considered for this position.

POSITION CRITERIA:
•    Team player attitude demonstrated in boss and peer relationships
•    Strong work ethic demonstrated through action orientation and a drive to achieve results
•    Ability to articulate technical information in an actionable format in both verbal and written form
•    Flexibility, ability to multitask, and proficiency in shifting priorities
•    Strong shop math skills
•    Basic knowledge of component parts
•    Demonstrated ability to read and interpret engineering drawings and applicable specifications
•    Ability to read and complete inspection ledgers
•    Demonstrated ability to select and use measuring equipment
•    Must have satisfactorily completed training and/or possess the necessary experience in the operation of numerical control machines or 854 Inspection Classification qualifications
•    Must have basic understanding of coordinate measurement machine theory and operation, and basic computer knowledge
•    Concern for continuous improvement
•    Concern for job safety

#IND123

#LI-RR2

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.

You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.

To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.

We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.